LANDR9.EXE Installation Instructions on 4.10 versions of NetWare using INSTALL.NLM.
===========================================================================

Section  1     Installing ODI Drivers on a Native NetWare Server.
Section  2     Installing ODI Drivers on a NetWare SFT III Server.
___________________________________________________________________________


     Novell has provided an installation script to be used with INSTALL.NLM 
     "Product Options".  However, it is still possible to manually copy the 
     ODI drivers to the file server.

     This script file can be run in serveral ways:
		1- From local A: Drive at Server.
		2- From local Drive at Client useing Rconsole (F4).
		3- From local SYS: volume (F3), by specifying the path including 
		  volume name..ie SYS:\LANDRx.
		4- From a diffrent server on the network (F3) by specifying
		  full path including server name..ie Server_Name\SYS:\LANDRx.

		NOTE: Fastest installation in order of performance is: 
			option 3, option 4, option 2, option 1.

------------------------------------------------------------------------------------
     Issue: 

     When selecting "PRODUCT OPTIONS" option in install, Screen to copy file appears 
     instead of the "PRODUCT OPTIONS" screen. 

     (Copy Files Option, SCREEN)
     ----------------------------------------------------------------------------       
     |                                            				|
     |  NetWare files will be installed from path:                    		|
     |                                            				|
     |    NW410:\NW410\INSTALL\ENGLISH\                     			|
     |                                            				|
     |  If you are installing from CD-ROM or a network directory, verify   	|
     |  that the above path corresponds to the source directory where the       |
     |  NetWare server installation files are located.  On CD-ROM, this    	|
     |  will be path <drive_or_vo_name>:\NW410\INSTALL\<language_dir>.     	|
     |                                            				|
     |    Press <F3> to specify a different path;                		|
     |    Press <Enter> to continue.                             		|
     |                                            				|
     ----------------------------------------------------------------------------

     Solution:

     Copy the following files from the NetWare CD: NETMAIN.ILS, NETMAIN.ICS,
     LANGFS.ILS to C:\NWSERVER.

          D:\NW410\BOOT\NATIVE\NETMAIN.ICS              6,560  11-17-94  2:16p 
          D:\NW410\INSTALL\ENGLISH\NETMAIN.ILS         33,024  11-15-94  1:41p
          D:\NW410\INSTALL\ENGLISH\SCRIPTS\LANGFS.ILS   2,130  10-31-94  4:57p 

     Generally this is a result of manually installing the server rather than
     installing though INSTALL.BAT.

 
===========================================================================
Section  1     Installing ODI Drivers on a Native NetWare Server.
___________________________________________________________________________

IF INSTALLING ON A NATIVE NETWARE SERVER:

     To Copy files :
          Explode the LANDR9 to a diskette.
          Place diskette in "A:" drive at the Server.
          Load "INSTALL.NLM",  
          Select "PRODUCT OPTIONS"
          Select "INSTALL A PRODUCT NOT LISTED"
          Select "ENTER" (Copy from A:\)

          NOTE:  PI_ICMD.NLM will load and copy files from the A: drive using 
		 the *.IPS script.

          The following events will occur:
               Save existing NBI, MSM, and TSM files in sys:system to 
               sys:system\oldlan if they exist.
               Copy ODI drivers and support modules to sys:system.
               Save existing NBI, MSM, and TSM files on the boot drive to
               a "oldlan" subdirectory if they exist.
               Copy NBI, MSM, and TSM files to the boot drive.
               Copy *.lan and *.ldi to the boot drive if a file with the
               same name already exists there.

===========================================================================
Section  2     Installing ODI Drivers on a NetWare SFT III Server.
---------------------------------------------------------------------------

     To Copy files :
          Explode the LANDR9 to a diskette.
          Place diskette in "A:" drive at the Server.
          Load "INSTALL.NLM",  
          Select "PRODUCT OPTIONS"
          Select "INSTALL A PRODUCT NOT LISTED"
          Select "ENTER" (Copy from A:\)

          NOTE:  PI_ICMD.NLM will load and copy files from the A: drive using 
		 the *.IPS script.

          The following events will occur:
               Save existing NBI, MSM, and TSM files in sys:system to 
               sys:system\oldlan if they exist.
               Copy ODI drivers and support modules to sys:system.
               Save existing NBI, MSM, and TSM files on the boot drive to
               a "oldlan" subdirectory if they exist.
               Copy NBI, MSM, and TSM files to the boot drive.
               Copy *.lan and *.ldi to the boot drive if a file with the
               same name already exists there.

           Note:  The files copied to the dos partition on each IOEngine will have
            the date of the machine when they were copied.
___________________________________________________________________________
          

          
